|

cwb_draw_antpat
~~~~~~~~~~~~~~~~~~~~~

|
| **Usage**
|
| draw the network antenna pattern (read config from the user\_parameters.C file)
|
| **Syntax**
|

 - ``cwb_draw_antpat`` polarization projection save

 .. code-block:: bash

    polarization 
                     0  - |Fx|                                          DPF
                     1  - |F+|                                          DPF
                     2  - |Fx|/|F+|                                     DPF
                     3  - sqrt((|F+|^2+|Fx|^2)/nIFO)                    DPF (default)
                     4  - |Fx|^2                                        DPF
                     5  - |F+|^2                                        DPF
                     6  - Fx                                            only with 1 detector
                     7  - F+                                            only with 1 detector
                     8  - F1x/F2x                                       only with 2 detectors
                     9  - F1+/F2+                                       only with 2 detectors
                     10 - sqrt(|F1+|^2+|F1x|^2)/sqrt(|F2+|^2+|F2x|^2)   only with 2 detectors
                     11 - The same as (10) but averaged over psi        only with 2 detectors

    projection       hammer(default)/rect 

    save             0(false)/1

|
| **Examples**
|

 - * cwb_dump_antpat 0